Center Console Assembly (Remove and Replace)
    
    
    Correction code
    
                                                                        15192402
                                                                        
                                                                        0.54
                                                                        
        
          NOTE: Unless otherwise explicitly
          stated in the procedure, the above correction code and FRT reflect all of the work
          required to perform this procedure, including the linked procedures. Do not stack correction codes unless
            explicitly told to do so.
        
          NOTE: See Flat Rate Times to learn
          more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
        
        
          NOTE: See Personal Protection to make sure proper PPE is worn when
          performing the below
          procedure.
      
  
- 2025-09-09: Cleaned up procedure and added steps to reinstall the software and program the keys.
 
Remove
- Remove the center console assembly. See Center Console Assembly - 1st Row (Remove and Install)
 
Install
- Install the center console assembly. See Center Console Assembly - 1st Row (Remove and Install)
 - Enable Service Mode. See Service Mode (Enable and Disable).
 - Unlock the vehicle Gateway. See Gateway (Unlock).
 - Reinstall the software. See Firmware Reinstall - Touchscreen.
 - Pair the existing keys through the touchscreen. See Replacement Keys - Program (No Keys Present)
 - Exit Service Mode. See Service Mode (Enable and Disable).