Stop - Liftgate - LH (Remove and Replace)
Correction code
12270702
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Open the liftgate.
-
Remove the LH liftgate stop from the
vehicle.
Install
-
Install the LH liftgate stop onto the
vehicle.
-
Close the liftgate and check gap/flush
and that the liftgate closes as expected. Adjust the LH liftgate stop as
necessary.
- Close the liftgate.