2024-09-09
Couvercle - filtre - HEPA (retirez et remplacez)
Code de correction
18105512 0.24 NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Protection individuelle to make sure wearing proper PPE when
performing the below procedure.
Avertissement
The video(s)
included in this procedure are meant as an overview for supplemental purposes only.
Follow all of the steps listed in the procedure to avoid damage to components and/or
personal
injury.
Retirer
- Retirez l'ensemble filtre HEPA. Voir Ensemble - filtre - HEPA (retirez et remplacez)
-
Retirez les vis qui fixent le couvercle de filtre HEPA à l'ensemble filtre HEPA, puis retirez le couvercle de l'ensemble.1.6 Nm (1.2 lbs-ft)TIpNous recommandons l’utilisation des outils suivants :
- Embout Torx T20
Installer
La procédure d’installation se fait en suivant l’ordre inverse de la procédure de retrait.