19/05/2023 09:49:31

Panneau arrière – siège de 2e rangée – 20/central (7 places) (retirez et remplacez)

Code de correction 13082332 REMARQUE : À moins d’indications explicites contraires dans la procédure, le code de correction et le temps forfaitaire ci-dessus représentent tout le travail à être fait pour cette procédure, notamment les procédures connexes. N’appliquez pas plusieurs codes de correction à la fois, à moins qu’il vous soit explicitement indiqué de le faire. REMARQUE : Consultez Temps forfaitaires pour en apprendre plus à propos des temps forfaitaires et de leur création. Vous pouvez transmettre par courriel vos commentaires relatifs aux valeurs des temps forfaitaires à LaborTimeFeedback@tesla.com. REMARQUE : Consultez Protection individuelle pour vous assurer de porter l’équipement de protection individuelle adéquat lors vous effectuez la procédure ci-dessous.

Retirer

  1. Open the LH rear door and lower the LH rear window.
  2. Move the LH 2nd row seat back forward.
  3. Release the center 2nd row seat switch, disconnect the switch connector, and then remove the switch from the seat assembly.
    Conseil : Use a plastic trim tool pry the top of the switch away from center seat back panel.
  4. Release the clips (x5) that attach the center 2nd row seat back panel to the center seat assembly, slide the panel forward to release the hooks (x2), and then remove the panel from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Early production vehicles may have 4 hooks.

Installer

  1. Insert the center 2nd row seat back panel hooks (x2) into the center seat back assembly, and then slide the panel rearward into position.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Early production vehicles may have 4 hooks.
  2. Secure the clips (x5) that attach the center 2nd row seat back panel to the center seat back assembly.
  3. Position the center 2nd row seat switch into the vehicle, connect the switch connector, and then install the switch into the seat assembly.
  4. Move the LH 2nd row seat back into the original position.
  5. Raise the LH rear window and close the LH front door.