2024-09-09

Isolator - Lower Spring - Rear - LH (Remove and Replace)

Correction code 31030032 0.66 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

  • 2023-06-29: 보충 목적 전용으로 전체 절차 비디오를 개요로 추가했습니다.
Warning IconA warning icon, calling your attention to a possibly risky situation
경고
The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.

Remove

  1. 차량에서 LH 후면 서스펜션 스프링을 탈거합니다. Spring - Rear Suspension - LH (Remove and Replace)을(를) 참조하십시오.
    Informational PurposesAn informational icon, calling your attention
    참고
    절연체를 탈거하기 위해 스프링 어셈블리에서 스프링 컴프레서를 탈거할 필요가 없습니다.
  2. LH 후면 서스펜션 스프링에서 LH 후면 서스펜션 스프링 하단 절연체를 탈거합니다.

Install

  1. LH 후면 서스펜션 스프링 하단 절연체를 LH 후면 서스펜션 스프링에 장착합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    스프링 상단을 절연체의 스토퍼와 정렬합니다.
  2. LH 후면 서스펜션 스프링을 차량에 장착합니다. Spring - Rear Suspension - LH (Remove and Replace)을(를) 참조하십시오.