Plastic Insulator - Suspension - Driver Seat (Remove and Replace)
Correction code
13010032
0.54
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- 차량에서 운전석 시트를 탈거합니다. Seat Assembly - 1st Row - LH (Remove and Replace)을(를) 참조하십시오.
- 운전석 시트 등받이 허리 지지대를 탈거합니다. 참조:
-
운전석 시트 서스펜션 플라스틱 절연체를 탈거합니다.
Install
-
운전석 시트 서스펜션 플라스틱 인슐레이터를 장착합니다.
- 운전석 시트 등받이 허리 지지대를 장착합니다. 참조:
- 운전석 시트를 차량에 장착합니다. Seat Assembly - 1st Row - LH (Remove and Replace)을(를) 참조하십시오.