2022-10-23

Tweeter - Front Door - LH (with Tether) (Remove and Replace)

Correction code 21212722 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. 도어에서 LH 전면 도어 트위터 어셈블리를 탈거합니다. Tweeter Assembly - Front Door - LH (with Tether) (Remove and Replace)을(를) 참조하십시오.
  2. LH 트위터 커버를 트위터 캐리어 어셈블리에 고정하는 클립(4개)을 분리한 다음 캐리어에서 커버를 분리합니다.
  3. LH 전면 도어 트위터를 캐리어 어셈블리에 고정하는 클립(3개)을 분리하고 가이드를 통해 테더를 유도한 다음 캐리어에서 트위터를 탈거합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    테더 스트랩의 원래 배치를 기록합니다.
  4. LH 전면 도어 트위터에서 테더를 분리합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    원래 배치를 기록합니다.

Install

  1. 탈거하는 동안 기록했던 배치와 동일하게 테더를 LH 전면 도어 트위터에 고정합니다.
  2. LH 전면 도어 트위터를 트위터 캐리어에 배치하고 테더를 캐리어에 배치한 다음 트위터를 캐리어에 고정하는 클립(3개)을 고정합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    모든 클립이 체결되었는지 확인합니다.
  3. 트위터 캐리어 어셈블리를 트위터 커버에 배치한 다음 커버 어셈블리를 캐리어에 고정하는 클립(4개)을 고정합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    어셈블리가 완전히 안착되었는지 확인합니다.
  4. LH 전면 도어 트위터 어셈블리를 장착합니다. Tweeter Assembly - Front Door - LH (with Tether) (Remove and Replace)을(를) 참조하십시오.