2024-09-09

Cover - Filter - HEPA (Remove and Replace)

Correction code 18105512 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Warning IconA warning icon, calling your attention to a possibly risky situation
경고
The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.

Remove

  1. HEPA 필터 어셈블리를 탈거합니다. 참조 Assembly - Filter - HEPA (Remove and Replace)
  2. HEPA 필터 커버를 HEPA 필터 어셈블리에 고정하는 나사를 탈거한 다음 어셈블리에서 커버를 탈거합니다.
    1.6 Nm (1.2 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T20 비트

Install

Installation procedure is the reverse of removal.