Cover - Rocker Panel - Lower - LH (Remove and Replace)
Correction code
12202602
0.12
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
-
LH 하단 로커 패널 커버를 전륜 및 후륜 휠 아치 라이너에 고정하는 바깥쪽 클립을 분리합니다.
그림 1. 전면 그림 2. 후륜 -
LH 하단 로커 패널 커버를 로커 패널에 고정하는 클립과 탭을 분리한 다음 패널에서 커버를 탈거합니다.
TIp플라스틱 트림 공구를 도어 패널과 로커 림 사이에 넣어 탭 분리를 보조합니다.
Install
Installation procedure is the reverse of removal.