2025-06-27

Latch - Hood (Remove and Replace)

Correction code 11350302 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

  • 2025-05-20: 최신 검증에 따라 후드 내 보관 유닛 탈거 단계를 액세스 패널 탈거 단계로 교체했습니다.

토크 규격

표 1. Torque Specifications: 래치 - 후드(탈거 및 교체)
Description Torque Value Recommended Tools Reuse/Replace Notes
후드 래치를 전면 엔드 캐리어에 고정하는 볼트
8 Nm (5.9 lbs-ft)
  • 10mm 소켓
Reuse

Remove

Informational PurposesAn informational icon, calling your attention
참고
후드 래치가 전자적으로 열리지 않으면 수동 전면 트렁크 도구를 사용하여 후드를 엽니다.
  • 1130534-00-A도구, 프렁크 릴리스, 수동, Model 3
  1. 후드 내 보관 유닛 접근 패널을 탈거합니다. 참조 항목: Access Panel - Underhood Storage Unit (Remove and Replace).
  2. 커넥터 잠금 장치를 분리한 다음 후드 래치 전기 커넥터를 연결 해제합니다.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    경고
    빨간색 잠금 탭을 누르지 마십시오. 빨간색 탭을 당겨 커넥터 잠금 장치와 분리한 다음 다시 당겨 커넥터를 분리합니다.
  3. 후드 래치의 위치를 마스킹 테이프로 표시합니다.
  4. 전면 엔드 캐리어에 후드 래치를 고정하는 볼트를 탈거합니다.
    8 Nm (5.9 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10mm 소켓
  5. 후드 래치에서 후드 래치 액추에이터 케이블을 분리합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    래치를 수동으로 개방하여 탈거를 위해 케이블을 느슨하게 합니다.
  6. 후드 래치에서 후드 래치 액추에이터 케이블 클립을 분리합니다.

Install

Installation procedure is the reverse of removal.