28/02/2023 18:44:31

하네스 - 등받이 - 2열 시트 - RH(7인승)(탈거 및 교체)

교정 코드 17100142 0.18 참고: 절차에서 명시적으로 언급하지 않는 한 위 교정 코드 및 FRT는 연결된 절차를 포함하여 이 절차를 수행하는 데 필요한 모든 작업을 반영합니다. 명시적으로 지시하지 않는 한 교정 코드를 누적하지 마십시오.참고: FRT와 그 생성 방법에 대한 자세한 내용은 표준 정비 작업시간을 참조하십시오. FRT 값에 대한 피드백을 제공하려면 LaborTimeFeedback@tesla.com으로 이메일을 보내십시오. 참고: 아래 절차를 수행할 때 개인 보호을(를) 참조하여 적절한 PPE를 착용했는지 확인하십시오.

탈거

  1. Open the RH doors and lower the RH windows.
  2. Move the RH front seat fully forward.
  3. Fold the RH 2nd row seat to the down position.
  4. Use the towel bar to move the RH 2nd row seat forward.
  5. Remove the RH 2nd row seat back panel. See 후면 패널 - 2열 시트 - RH(탈거 및 교체).
  6. Remove the RH 2nd row seat shoulder switch. See 숄더 스위치 - 등받이 - 2열 - LH(탈거 및 교체).
  7. Remove the RH 2nd row toe kick cover. See 커버 - 토우 킥 - 2열 시트 - RH(7인승)(탈거 및 교체).
  8. Release the clips (x2) that attach the RH 2nd row seat backrest harness to the bottom side of the seat frame, disconnect the connector, and then remove the seat harness from the seat assembly.
    Informational PurposesAn informational icon, calling your attention
    참고
    Remove the elastic harness holder to the release harness.
  9. Disconnect the RH 2nd row seat heater connector.
  10. Release the clip that attaches the RH 2nd row seat heater connector to the seat assembly.
  11. Release the fir tree clips (x2), and then release the shoulder switch harness from the harness guides (x5) on the upholstery support.
  12. Use a pry tool to release the shoulder switch connection from between the seatback and seat frame, and then remove the harness from the seat assembly.

장착

  1. Use a pry tool to insert the shoulder switch connection between the seatback and seat frame, and then route the harness onto the seat assembly.
  2. Secure the fir tree clips (x2), and then secure the shoulder switch harness to the harness guides (x5) on the upholstery support.
  3. Install the clip that attaches the RH 2nd row seat heater connector to the seat assembly.
  4. Connect the RH 2nd row seat heater connector.
  5. Secure the clips (x2) that attach the RH 2nd row seat backrest harness to the bottom side of the seat frame, and then connect the connector.
    Informational PurposesAn informational icon, calling your attention
    참고
    Install the plastic harness retainer.
  6. Install the RH 2nd row toe kick cover. See 커버 - 토우 킥 - 2열 시트 - RH(7인승)(탈거 및 교체).
  7. Install the RH 2nd row seat shoulder switch. See 숄더 스위치 - 등받이 - 2열 - LH(탈거 및 교체).
  8. Install the RH 2nd row seat back panel. See 후면 패널 - 2열 시트 - RH(탈거 및 교체).
  9. Fold the RH 2nd row seat to the up position.
  10. Move the RH front seat to the original position.
  11. Raise the RH windows and close the RH doors.