Decor Trim - Instrument Panel - Main (Remove and Replace) (RHD)
Correction code
14054902
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- LH 계기판 엔드캡을 탈거합니다. End Cap - Instrument Panel - LH (Remove and Replace)을(를) 참조하십시오.
- LH 에어 웨이브 엔드캡을 탈거합니다. End Cap - Air Wave - LH (Remove and Replace)을(를) 참조하십시오.
- 차량 RH 쪽에서 1단계~2단계를 반복합니다.
-
주 계기판 장식 트림을 고정하는 클립(14개)을 분리한 다음 계기판에서 트림을 탈거합니다.
Install
Installation procedure is the reverse of removal, except for the following:
- 클립이 손상되었는지 점검하고 필요한 경우 클립을 교체합니다.
- 계기판 장식 트림 클립이 계기판에 완전히 안착되었는지 확인합니다.
- 계기판 장식 트림 클립이 완전히 안착되었는지 확인하기 위해 Toolbox를 사용하여 에어 웨이브 기능 점검을 수행합니다.