2021-07-23

Seal - Header - LH (Remove and Replace)

Correction code 11702102 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. LH 전면 및 후면 도어를 열고 LH 전면 및 후면 창문을 내립니다.
  2. 12V 전원을 연결 해제합니다. 12V/LV Power (Disconnect and Connect)을(를) 참조하십시오.
  3. LH B필러 아플리케를 탈거합니다. 참조 Applique - B-Pillar - LH (Remove and Replace)
  4. LH 헤더 씰을 LH 상단 브라이트 트림 캡에 고정하는 클립을 분리한 다음 아래로 당겨 씰의 나머지 부분을 분리합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    중간 A필러에서 시작하여 뒤쪽 방향으로 작업합니다.

Install

  1. 차량에 LH 헤더 씰을 배치한 다음 씰을 LH A필러에 고정하는 클립을 조입니다.
  2. LH 헤더 실의 나머지 부분을 장착합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    중간 A필러에서 시작하여 뒤쪽 방향으로 작업합니다.
  3. LH B필러 아플리케를 장착합니다. 참조 Applique - B-Pillar - LH (Remove and Replace)
  4. 12V 전원을 연결합니다. 12V/LV Power (Disconnect and Connect)을(를) 참조하십시오.
  5. LH 도어를 닫고 LH 창문을 내립니다.