Back Panel - 3rd Row Seat - LH (Remove and Replace)
Correction code
13064002
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- 리어 트렁크 적재함 바닥을 탈거합니다. Trunk Load Floor - Rear (Remove and Replace)을(를) 참조하십시오.
-
트림 공구를 사용하여 LH 3열 시트 후면 패널을 등받이 어셈블리에 고정하는 클립(10개)을 시트 상단에서 아래쪽을 향하여 작업하여 분리합니다.
- 후면 패널을 위쪽으로 이동하여 가이드 탭을 시트에서 분리합니다.
-
차량에서 후면 패널을 탈거합니다.
Install
- 등받이 어셈블리의 슬롯에 후면 패널의 가이딩 탭을 삽입합니다.
-
아래쪽에서 시작하여 위쪽으로 작업하며 모든 클립이 등받이 어셈블리에 체결되도록 후면 패널을 눌러 장착합니다.
- 후면 트렁크 적재함 바닥을 장착합니다. Trunk Load Floor - Rear (Remove and Replace)을(를) 참조하십시오.