2021-08-31

Diamond Cover - Seat Side - 1st Row - RH (Remove and Replace)

Correction code 13072502 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. 운전석 시트 안쪽 사이드 실드를 탈거합니다. 다음을 참조하십시오. Side Shield - Inboard - Driver Seat (Remove and Replace)
  2. 12V 전원을 연결 해제합니다. 참조 12V/LV Power (Disconnect and Connect)
  3. 일자 드라이버를 사용하여 LH 전면 시트 버클 커넥터(2개)를 연결 해제합니다.
  4. LH 전면 시트에서 다이아몬드 커버 클립(2개)을 탈거합니다.
  5. LH 전면 시트에서 다이아몬드 커버 클립(2개)을 탈거합니다.
  6. LH 전면 시트 버클 커넥터를 연결 해제하고 다이아몬드 커버를 탈거합니다.

Install

  1. 다이아몬드 커버를 장착합니다.
  2. LH 전면 시트 버클 커넥터를 장착합니다.
  3. LH 전면 시트에서 다이아몬드 커버 클립(2개)을 장착합니다.
  4. LH 전면 시트 버클 커넥터를 연결합니다.
  5. 12V 전원을 연결합니다. 12V/LV Power (Disconnect and Connect)을(를) 참조하십시오.
  6. 운전석 시트 안쪽 사이드 실드를 장착합니다. Side Shield - Inboard - Driver Seat (Remove and Replace)을(를) 참조하십시오.