2024-09-09

Trim - Liftgate - Lower (Remove and Replace)

Correction code 15111302 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

  • 2023-08-31: 표지 이미지 및 몇 가지 단계를 업데이트했습니다.
Warning IconA warning icon, calling your attention to a possibly risky situation
경고
The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.

Remove

  1. 리프트게이트 상단 트림을 탈거합니다. 참조 항목: Trim - Upper - Liftgate (Remove and Replace).
  2. 리프트게이트 하단 트림을 리프트게이트에 고정하는 푸시 클립(2개), 클립(12개) 및 위치 지정 핀(6개)을 분리합니다.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    경고
    언급된 구성품을 순서대로 탈거합니다.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    경고
    마지막 클립을 탈거할 때는 트림이 갑자기 낙하하여 커넥터가 손상되는 것을 방지하기 위해 한 손으로 트림을 지지해 주세요.
  3. 리프트게이트 하단 트림을 리프트게이트에 고정하는 왼쪽 하단 모서리의 커넥터(1개)를 연결 해제합니다.

Install

  1. 리프트게이트 하단 트림을 리프트게이트에 고정하는 왼쪽 하단 모서리의 커넥터(1개)를 연결합니다.
  2. 리프트게이트 하단 트림을 리프트게이트에 고정하는 위치 지정 핀(6개), 클립(12개) 및 푸시 클립(2개)을 장착합니다.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    경고
    언급된 구성품을 순서대로 장착합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    장착하기 전에 클립을 확인하고 손상된 클립은 교체해 주세요.
  3. 리프트게이트 상단 트림을 장착합니다. 참조 항목: Trim - Upper - Liftgate (Remove and Replace).