Seal - Perimeter - HV Battery (Remove and Replace)
Correction code 16103002 3.42 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- HV 배터리를 탈거합니다. 참조 항목: HV Battery (AWD) (Non-Structural Pack) (Remove and Install).
-
HV 배터리 주변 씰을 제거하여 폐기합니다.
그림 1. 보조 베이 타입
Install
-
보조 베이 주변 씰을 HV 배터리에 장착합니다.
- HV 배터리를 장착합니다. 참조 항목: HV Battery (AWD) (Non-Structural Pack) (Remove and Install).