28/02/2023 18:44:25

서비스 패널 - 계기판(탈거 및 교체)

교정 코드 21051212 0.06 참고: 절차에서 명시적으로 언급하지 않는 한 위 교정 코드 및 FRT는 연결된 절차를 포함하여 이 절차를 수행하는 데 필요한 모든 작업을 반영합니다. 명시적으로 지시하지 않는 한 교정 코드를 누적하지 마십시오.참고: FRT에 대한 자세한 내용과 FRT가 만들어진 방법은 표준 정비 작업시간을 참조하십시오. FRT 값에 대한 피드백을 제공하려면 LaborTimeFeedback@tesla.com으로 이메일을 보내십시오. 참고: 아래 절차를 수행할 때 개인 보호을(를) 참조하여 적절한 PPE를 착용했는지 확인하십시오.

탈거

  1. Open the LH front door and lower the LH front window.
  2. Release the clips (x4) and tabs (x4) that attach the instrument panel service panel to the vehicle, and then disconnect the temperature sensor connector.
  3. Remove bolts (x2) that attach the cabin temperature sensor to instrument panel service panel, and then remove the sensor from the service panel.
    0.7 Nm (6 lbs-in)
    팁: 다음 공구 사용을 권장합니다.
    • Torx T20 비트

장착

  1. Position the cabin temperature sensor to instrument panel service panel, and then install the bolts (x2) that attach the sensor to the service panel.
    0.7 Nm (6 lbs-in)
    팁: 다음 공구 사용을 권장합니다.
    • Torx T20 비트
  2. Position the instrument panel service panel assembly to the instrument panel, connect the temperature sensor connector, and then secure the clips (x4) and tabs (x4) that attach the service panel to the vehicle.
  3. Raise the LH front window and close the LH front door.