Bump Stop - Liftgate - LH (Remove and Replace)
Correction code
11335202
0.12
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
- 2024-06-04: Toolbox 문서에 범프 스톱 조정에 관한 추가 정보 링크를 추가했습니다.
Remove
- 리프트게이트를 엽니다.
-
LH 리프트게이트 범프 스톱 카운터를 시계 방향으로 돌려 차량에서 탈거합니다.
참고범프 스톱을 탈거할 때 범프 스톱을 돌린 회전 수를 셉니다.
Install
Installation procedure is the reverse of removal, except for the following:
- 탈거 중 기록한 같은 회전 수를 이용해 범프 스톱을 장착합니다.
- 리프트게이트에서 후면 페시아 어셈블리까지 단차를 확인하고 필요한 경우에는 조정합니다.참고범프 스톱 조정에 관한 추가 정보는 Toolbox 문서 8199800을 참조하십시오.