Shoulder Switch – Seat Back – 2nd Row – LH (Remove and Replace)
Correction code
13058102
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
-
시트에 숄더 스위치를 고정하는 클립을 트림 공구로 분리합니다.
TIp트림 공구를 숄더 스위치 앞쪽에서 삽입합니다.경고숄더 스위치에는 전기 커넥터가 내장되어 있습니다. 아직 숄더 스위치를 당겨 시트에서 분리하지 마십시오.
-
숄더 스위치에서 전기 커넥터를 연결 해제합니다.
- 차량에서 숄더 스위치를 탈거합니다.
Install
-
숄더 스위치에 전기 커넥터를 연결합니다.
-
숄더 스위치를 장착하고 클립을 완전히 체결합니다.
- 숄더 스위치를 테스트하여 예상대로 작동하는지 확인합니다.