2021-07-23

Bracket - License Plate - Rear (EMEA and APAC) (Remove and Replace)

Correction code 12072302 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. 후면 번호판 브래킷을 차량에 고정하는 나사를 탈거한 다음 차량에서 브래킷을 탈거합니다.
    Informational PurposesAn informational icon, calling your attention
    TIp
    다음 공구 사용을 권장합니다.
    • T20 소켓
    • 2인치 익스텐션

Install

  1. 나사를 탈거하는 동안 나사산 인서트가 손상되지 않았는지 확인하고 IPA 와이프로 표면을 소제합니다.
  2. 후면 번호판 브래킷을 차량에 배치한 다음 브래킷을 차량에 고정하는 나사를 장착합니다.
    1.2 Nm (.9 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    다음 공구 사용을 권장합니다.
    • T20 소켓
    • 2인치 익스텐션