2021-04-22

Side Shield Sub-Assembly - 2nd Row Seat (7-Seat) (Remove and Replace)

Correction code 13080052 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. RH 도어를 열고 RH 창문을 완전히 내립니다.
  2. 동승석 시트를 완전히 앞으로 이동합니다.
  3. RH 2열 시트를 이지 엔트리 모드로 이동합니다.
  4. RH 2열 시트 토우 킥 커버를 탈거합니다. Cover - Toe Kick - 2nd Row Seat - RH (7-Seat) (Remove and Replace)을(를) 참조하십시오.
  5. RH 2열 시트 사이드 실드를 쿠션 팬에 고정하는 클립을 탈거합니다.
  6. RH 2열 시트 사이드 실드를 RH 2열 시트 어셈블리에 고정하는 클립을 분리한 다음 실드를 위쪽으로 들어 올려 어셈블리에서 탈거합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    전기 커넥터가 아직 연결되어 있으므로 어셈블리에서 실드를 잡아당기지 마십시오.
  7. RH 2열 시트 사이드 실드 전기 커넥터를 연결 해제한 다음 실드를 어셈블리에서 탈거합니다.

Install

  1. RH 2열 시트 사이드 실드 전기 커넥터를 연결합니다.
  2. RH 2열 시트 사이드 실드를 RH 2열 시트 어셈블리에 배치한 다음 클립을 장착합니다.
  3. RH 2열 시트 사이드 실드를 쿠션 팬에 고정하는 클립을 장착합니다.
  4. RH 2열 시트 토우 킥 커버를 장착합니다. Cover - Toe Kick - 2nd Row Seat - RH (7-Seat) (Remove and Replace)을(를) 참조하십시오.
  5. RH 2열 시트를 원래 위치로 이동합니다.
  6. 동승석 시트를 원래 위치로 이동합니다.
  7. RH 도어를 닫고 RH 창문을 올립니다.