2020-12-16

Bracket - Taillight - LH (Remove and Replace)

Correction code 10017102 0.60 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Torque Specifications

표 1. Torque Specifications: Bracket - Taillight - LH (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
LH 테일라이트 브래킷을 차량에 고정하는 볼트
4 Nm (2.9 lbs-ft)
  • 10mm 소켓
  • 4인치 익스텐션
Reuse

Remove

  1. 후면 페시아를 탈거합니다. Fascia - Rear (Remove and Install)을(를) 참조하십시오.
  2. LH 테일라이트 브래킷을 차체에 고정하는 볼트를 탈거한 다음 차량에서 브래킷을 탈거합니다.
    4 Nm (2.9 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10mm 소켓
    • 4인치 익스텐션

Install

Installation procedure is the reverse of removal.