Switch - Seat Fold (Remove and Replace)
Correction code
13051902
0.36
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- 모든 도어를 열고 모든 창문을 완전히 내립니다.
- 전면 시트를 가장 앞쪽 위치로 이동합니다.
- 2열 하단 시트 쿠션을 탈거합니다. 참조 항목: Seat Cushion - Lower - 2nd Row (Remove and Replace).
- LH 트렁크 사이드 트림을 탈거합니다. 참조 항목: Trim - Side - Trunk - LH (Remove and Replace).
-
2열 시트 폴드 스위치 팩을 LH 트렁크 쪽 트림에 고정하는 탭(5개)를 분리한 다음 트림에서 분리합니다.
Install
Installation procedure is the reverse of removal.