2025-06-27

Drip Guard - Car Computer (HW4) (Remove and Replace)

Correction code 2110022012 0.66 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

  • 2025-04-07: 마지막 단계에 대한 이미지를 추가했습니다.

Remove

  1. RH 계기판 엔드캡을 탈거합니다. 참조 항목: End Cap - Instrument Panel - LH (Remove and Replace).
  2. RH 중간 A필러 어셈블리를 탈거합니다. 참조 항목: Trim - A-Pillar - Middle - LH (Remove and Replace).
  3. RH 하단 A필러 트림을 탈거합니다. 참조 항목: Trim - A-Pillar - Lower - LH (Remove and Replace).
  4. RH 발밑 공간 커버를 탈거합니다. 참조 항목: Cover - Footwell - Passenger (LHD) (Remove and Replace).
  5. 주 계기판 장식 트림을 탈거합니다. 참조 항목: Decor Trim - Instrument Panel - Main (Remove and Replace).
  6. 글로브박스를 탈거합니다. 참조 항목: Glove Box - Without Knee Airbags (Remove and Replace).
  7. 탭(3개)을 해제한 다음 차량에서 드립 가드 어셈블리를 탈거합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    드립 가드 어셈블리를 당긴 다음 차량 컴퓨터 앞쪽으로 기울여 탈거합니다.

Install

Installation procedure is the reverse of removal.