Bracket - License Plate - Front (Remove and Replace)
Correction code
12070102
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
- 1049517-00-A 인체공학적 실리콘 심 롤러
Remove
-
전면 번호판을 전면 페시아에 고정하는 나사를 탈거한 다음 번호판을 탈거합니다.
-
알코올을 사용해 브래킷 테이프, 잔류물, 찌꺼기를 전면 페시아에서 닦아냅니다.
Install
-
번호판을 전면 번호판 브래킷에 장착하고 번호판을 전면 페시아에 고정하는 나사를 장착합니다.
3 Nm (2.2 lbs-ft)