B-Cover - Inner - 2nd Row - RH (Remove and Replace)
Correction code
13084402
0.30
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Remove
- RH 하단 C필러 트림을 탈거합니다. Trim - C-Pillar - Lower - LH (Remove and Replace)을(를) 참조하십시오.
- RH 2열 시트 등받이를 탈거합니다. Seat Back - 2nd Row - RH (Remove and Replace)을(를) 참조하십시오.
- 시트 등받이를 수직으로 세우고 어셈블리를 안전하고 안정적인 작업 공간에 놓습니다.
-
RH 2열 B커버를 시트에 고정하는 클립을 분리한 후 트림을 앞쪽으로 당겨 시트 프레임에서 탈거합니다.
Install
Installation procedure is the reverse of removal.