2020-12-16

Carpet - Rear (Remove and Replace)

Correction code 15303202 1.02 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. 모든 도어를 엽니다.
  2. 모든 창문을 끝까지 내립니다.
  3. LH 및 RH 중간 A필러 트림을 탈거합니다. Trim - A-Pillar - Middle - LH (Remove and Replace)을(를) 참조하십시오.
  4. LH 및 RH 하단 A필러 트림을 탈거합니다. Trim - A-Pillar - Lower - LH (Remove and Replace)을(를) 참조하십시오.
  5. 운전석 시트 및 전면 동승석 시트를 탈거합니다. Seat Assembly - 1st Row - LH (Remove and Replace)을(를) 참조하십시오.
  6. 센터콘솔을 탈거합니다. Center Console (Remove and Install)을(를) 참조하십시오.
  7. LH 및 RH 하단 B필러 트림을 탈거합니다. Trim - B-Pillar - Lower - LH (Non-Structural Pack) (Remove and Replace)을(를) 참조하십시오.
  8. 2열 하단 시트 쿠션을 탈거합니다. Seat Cushion - Lower - 2nd Row (Remove and Replace)을(를) 참조하십시오.
  9. LH 및 RH 하단 C필러 트림을 탈거합니다. Trim - C-Pillar - Lower - LH (Remove and Replace)을(를) 참조하십시오.
  10. 차량에서 2열 플로어 매트를 탈거합니다.
  11. 메인 카펫을 하단 시트 쿠션 프레임에 고정하는 클립을 분리합니다.
  12. 차량에서 후면 카펫을 탈거합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    후면 메인 카펫의 뒤쪽을 위로 당긴 후, 카펫을 뒤쪽으로 밀어 LH 후면 도어를 통해 탈거합니다.

Install

Installation procedure is the reverse of removal.