2020-12-16

Seal - Inner Belt - Rear Door - LH (Remove and Replace)

Correction code 11704102 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. LH 후면 도어 트림 패널을 탈거합니다. Panel - Door Trim - Rear - LH (Remove and Install)을(를) 참조하십시오.
  2. 내측 벨트 실의 후면 및 전면을 후면 도어에 고정하는 클립을 분리한 다음 내측 벨트 씰을 위로 당겨 분리합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    도어에 남아 있는 클립을 탈거한 다음 내측 벨트 씰의 전면 및 후면에 클립을 장착합니다.

Install

  1. 후면 도어 내측 벨트 씰을 후면 도어 안쪽으로 아래를 향해 누릅니다.
  2. 내부 벨트 씰을 후면 도어에 고정하는 클립(6개)을 장착합니다.
  3. LH 후면 도어 트림 패널을 장착합니다. Panel - Door Trim - Rear - LH (Remove and Install)을(를) 참조하십시오.