팬 - 카메라 - 전방(탈거 및 교체)
Correction code
17242102
0.12
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make sure wearing proper PPE when
performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.
Torque Specifications
| Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
|---|---|---|---|---|
| 전방 카메라 팬을 고정하는 나사 |
![]() 0.12 Nm (1 lbs-in) |
|
Reuse |
Remove
- 상단 쿼드 카메라 커버를 탈거합니다. 참조 항목: Quad Camera Cover - Upper (Remove and Replace).
-
전방 카메라 팬을 고정하는 나사(3개)를 푼 다음 차량에서 전방 카메라 팬을 탈거합니다.
0.12 Nm (1 lbs-in)TIpUse of the following tool(s) is recommended:- Torx T6 비트
- 디지털 토크 스크루드라이버 0.10Nm - 2.0Nm
Install
Installation procedure is the reverse of removal.