2020-12-16

Seal - B-Pillar Applique - LH (Remove and Replace)

Correction code 11700802 0.30 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. B필러 아플리케를 탈거합니다. Applique - B-Pillar - LH (Remove and Replace)을(를) 참조하십시오.
  2. B필러 아플리케에서 B필러 아플리케 씰을 분리합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    씰의 하단부를 당긴 다음 측면을 아플리케 채널에서 분리합니다.

Install

  1. B필러 아플리케에 B필러 아플리케 씰을 배치합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    고정 탭이 측면 씰 아래에 끼워져 있는지 확인합니다.
  2. B필러 아플리케 채널에 LH B필러 아플리케 씰을 장착합니다.
  3. LH B필러에서 잔류 접착제를 제거하고 IPA 헝겊으로 표면을 닦습니다.
  4. LH B필러 아플리케를 장착합니다. Applique - B-Pillar - LH (Remove and Replace)을(를) 참조하십시오.