2021-07-23

Duct - Floor - 2nd Row - Main (Non-Structural Pack) (Remove and Replace)

Correction code 18109702 0.66 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. LH 전면 카펫을 탈거합니다. Carpet - Front - LH (Remove and Replace)을(를) 참조하십시오.
  2. 메인 2열 플로어 덕트를 차량에 고정하는 클립을 분리합니다.
  3. HVAC 어셈블리 및 RH 덕트에서 메인 2열 플로어 덕트를 분리한 다음 차량에서 탈거합니다.

Install

  1. 메인 2열 플로어 덕트를 HVAC 어셈블리 및 RH 덕트에 장착합니다.
  2. 메인 2열 플로어 덕트를 차량에 고정하는 클립을 조입니다.
  3. LH 전면 카펫을 장착합니다. Carpet - Front - LH (Remove and Replace)을(를) 참조하십시오.