2020-12-16

Cover - Tow Hook - Front (Remove and Install)

Correction code 10011011 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See 개인 보호 to make sure wearing proper PPE when performing the below procedure. See 인체공학적 주의 사항 for safe and healthy working practices.

Remove

  1. 두 엄지를 1시와 2시 방향에 둔 상태에서 주먹을 범퍼 페시아 표면에 대고 손의 위치를 지지합니다. 두 엄지를 모두 사용해 커버의 외부 모서리에 힘을 가합니다.
  2. 전면 견인 후크 커버에서 12V 점퍼 와이어를 탈거한 후, 차량에서 커버를 탈거합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    고정 탭들을 한꺼번에 부드럽게 쥐고 와이어를 탈거합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    새로운 견인 후크 커버(1493746-XX-A)를 주문할 때 색상 코드를 기록합니다.

Install

  1. 전면 견인 후크 커버에 12V 점퍼 와이어를 연결합니다.
    Informational PurposesAn informational icon, calling your attention
    참고
    2개의 와이어 단자가 모두 고정 탭에 완전히 안착했는지 확인합니다.
  2. 위치 탭을 1시와 2시 방향 사이에 삽입하고 하단 스냅 핏 탭을 페시아의 슬롯 안쪽으로 돌립니다. 탭의 자리를 찾으면 외부 모서리를 눌러 커버가 딸깍 소리를 내며 장착되도록 합니다.