04/08/2023 08:49:30

Bezel - Rear View Mirror (Remove and Replace)

Code de correction 15050212 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Protection individuelle to make sure wearing proper PPE when performing the below procedure.

  • 20-07-2023 : Vidéo ajoutée dans « Installation de la pièce ».

Retirer

  1. Installez la nouvelle lunette sur l'ensemble du rétroviseur.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Prenez soin de ne pas égratigner le miroir arrière.

Installer

Warning IconA warning icon, calling your attention to a possibly risky situation
Avertissement
The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
  1. Installez la nouvelle lunette sur l’ensemble du rétroviseur.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Vérifiez que l'enjoliveur est fixé de manière adéquate.