27/12/2022 21:10:49

Hose - Return - Powertrain (Non-Heat Pump) (Remove and Replace)

Code de correction 18303102 3.48 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Protection individuelle to make sure wearing proper PPE when performing the below procedure.

Retirer

  1. Retirez la batterie haute tension. Voir HV Battery (RWD) (Remove and Install).
  2. Dégagez les attaches (x5) qui fixent le flexible de retour (inférieur) du groupe motopropulseur au côté droit de la batterie haute tension (HT) et retirez le flexible de la batterie HT.
  3. Retirez les bouchons du flexible de retour du groupe motopropulseur, le cas échéant.

Installer

La procédure d’installation se fait en suivant l’ordre inverse de la procédure de retrait.