2025-03-20
Caméra - vers l’arrière (retirez et remplacez)
Code de correction
17250102 0.12 NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Protection individuelle to make sure wearing proper PPE when
performing the below procedure.
Procédure
Avertissement
Whenever a camera has been moved out
of its original position (for example, a camera or windshield replacement), camera
calibration data must be cleared using the vehicle touchscreen: Controls > Service > Camera Calibration >
Clear
Calibration.
- La caméra orientée vers l'arrière ne peut pas être commandée en tant que pièce séparée. Si un remplacement est nécessaire, remplacez l'interrupteur de déverrouillage extérieur du coffre et l'ensemble de la caméra orientée vers l'arrière. Voir Switch and Camera Assembly - Exterior Release - Trunk (Remove and Replace).