27/12/2022 21:09:05

Actuator - Vent - LH (Remove and Replace)

Code de correction 18103402 0.30 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Protection individuelle to make sure wearing proper PPE when performing the below procedure.

Retirer

  1. Retirez l'évent avant gauche. Voir Vent - Front - LH (Remove and Replace).
  2. Retirez les boulons qui fixent l'actionneur d'évent de gauche à l'évent, puis retirez l'actionneur d'évent de gauche.

Installer

La procédure d’installation se fait en suivant l’ordre inverse de la procédure de retrait.