24/02/2023 17:33:02

ECU - Charge Port (Combo Adapter) (Retrofit)

Code de correction 440151060.18NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Protection individuelle to make sure wearing proper PPE when performing the below procedure.

Installer

La procédure d’installation est l’inverse de la procédure de retrait, à l’exception de ce qui suit :

  1. Réglez la valeur « Port de recharge natif » :
    1. Dans la Boîte à outils, ouvrez le tableau de bord de l’infodivertissement.
    2. Sélectionnez « Vehicle Configuration » (Configuration du véhicule).
    3. Sélectionnez « Read Config », puis cliquez sur Exécuter.
    4. Faites défiler les options jusqu’à « plc_adapter_type ».
    5. Sélectionnez « Native Charge Port ».
    6. Sélectionnez « Apply Changes », puis cliquez sur Exécuter.
  2. Reinstall the vehicle firmware. See Software Reinstall - Touchscreen.