21/02/2024 15:37:57

Étalonnage par cycle de conduite – caméra avant

Code de correction 17230500

Informational PurposesAn informational icon, calling your attention
Remarque
Cette procédure ne concerne que les véhicules avec Autopilote de première génération.
Informational PurposesAn informational icon, calling your attention
Remarque
Si vous en disposez, ajustez la caméra avant au moyen de la cible d’étalonnage de caméra Cible d’étalonnage – caméra avant.
Informational PurposesAn informational icon, calling your attention
Remarque
Cette procédure indique comment effectuer l’étalonnage par cycle de conduite de la caméra avant. Elle ne vise pas la caméra arrière.

Procédure

  1. Connect a laptop to the diagnostic port of the vehicle, and then use Toolbox 3 to locally connect to the vehicle. See Toolbox 3 (Connecter et déconnecter).
  2. Unlock the vehicle gateway for diagnostic communication. See Déverrouillage de passerelle.
  3. Using Toolbox 3:
    1. Select the Actions tab and search for "DAS Service Point Calibration".
    2. Select the ODIN routine PROC_DAS_X_SERVICE-POINT-CALIBRATIONSearch for routine in ToolboxDriver Assistance, and then click the link of the routine.
    3. Click RUN and follow the onscreen instructions to calibrate the forward facing camera.
      Warning IconA warning icon, calling your attention to a possibly risky situation
      Avertissement
      Perform the calibration procedure in a suitable location and comply with all local traffic safety laws.
      Informational PurposesAn informational icon, calling your attention
      Remarque
      Have an assistant monitor Toolbox during the drive cycle.