20/12/2023 17:13:49
Nozzle - Windshield Washer (Adjust)
Avertissement
Cette procédure est un BROUILLON, même si elle a été validée. Il peut manquer des avertissements et des mises en garde. Respectez les exigences de sécurité et faites preuve d’une extrême prudence lorsque vous travaillez sur ou près de systèmes et de composants haute tension. Transmettez toute correction ou remarque à ServiceDevelopment@teslamotors.com.
- Open LH front door
- Lower LH front window
-
Activate windshield washers and verify washer nozzle spray pattern
-
Confirm the jets sprayed in the green zone.
RemarqueIf the jet spray is on-target, discontinue this procedure. If the spray is off-target, continue to the next step.
-
Using a straight pick, adjust the washer nozzles.
RemarqueAlign the washer jet angle to between the middle of the windshield and 15 mm above the black border of dots (frit) along the bottom of the windshield (11 degrees +/- 1 degree).
-
Activate windshield washers and verify washer nozzle spray pattern
-
Raise LH front window and close door