2026-04-30

Harness - Seat Cushion - 3rd Row Seat (7-Seat) (Remove and Replace)

Code de correction 1710080401 1710080402 FRT 0.24 REMARQUE : À moins d’indications explicites contraires dans la procédure, le code de correction et le temps forfaitaire indiqués ci-dessus représentent tout le travail à être fait pour cette procédure, notamment les procédures connexes. N’appliquez pas plusieurs codes de correction à la fois, à moins qu’il vous soit explicitement indiqué de le faire. REMARQUE : Consultez Temps forfaitaires pour en apprendre plus à propos des temps forfaitaires et de leur création. NOTE : Consultez Protection individuelle pour vous assurer de porter l’équipement de protection individuelle adéquat lorsque vous effectuez la procédure ci-dessous. REMARQUE : Voir Précautions ergonomiques pour consulter les pratiques de travail sécuritaires et saines.

Retirer

  1. Remove the 3rd row seat cushion. See Seat Cushion - 3rd Row (7-Seat) (Remove and Replace).
  2. Disconnect the LH side of the seat cushion harness connector.
  3. Remove the rear USB assembly. See Rear USB (Remove and Replace).
  4. Disengage the retainers that attach the middle of the harness to the seat cushion assembly.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x retainers, 1x cloth retainer
  5. Disconnect the RH side of the connector and disengage the retainers (x4) that attach the rear side of the harness to the seat cushion assembly.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    After disconnecting the retainers, carefully remove harness from cushion by maneuvering around the retainers.

Installer

  1. Connect the RH side of the connector, and then engage the retainers (x4) that attach the rear side of the harness to the seat cushion assembly.
  2. Re-engage the retainers that attach the middle of the harness to the seat cushion assembly.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x retainers, 1x cloth retainer
  3. Install the rear USB assembly. See Rear USB (Remove and Replace).
  4. Reconnect the LH side of the seat cushion harness connector.
  5. Install the 3rd row seat cushion. See Seat Cushion - 3rd Row (7-Seat) (Remove and Replace).