2026-04-30

2nd Row B-Cover Center Inner - 7-Seater (Remove and Replace)

Code de correction 1308020101 1308020102 REMARQUE : À moins d’indications explicites contraires dans la procédure, le code de correction et le temps forfaitaire indiqués ci-dessus représentent tout le travail à être fait pour cette procédure, notamment les procédures connexes. N’appliquez pas plusieurs codes de correction à la fois, à moins qu’il vous soit explicitement indiqué de le faire. REMARQUE : Consultez Temps forfaitaires pour en apprendre plus à propos des temps forfaitaires et de leur création. NOTE : Consultez Protection individuelle pour vous assurer de porter l’équipement de protection individuelle adéquat lorsque vous effectuez la procédure ci-dessous. REMARQUE : Voir Précautions ergonomiques pour consulter les pratiques de travail sécuritaires et saines.

  • 2026-01-26: Released new procedure.

Retirer

  1. Open all four doors.
  2. Move LH front seat forward.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Adjust seat back if needed to avoid contacting headliner.
  3. Lower all four windows.
  4. Move RH front seat forward.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Adjust seatback if needed to avoid contacting headliner.
  5. Fold 2nd row 60 seatback down.
  6. Remove center seatback headrest.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Simultaneously depress the guide button and insert a 90 degree pick into the guide opening, and lift up while engaged.
  7. Remove center backpanel from 2nd row center seatback.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Lift up at the lower 20 backpanel and then slide forward to release.
  8. Remove center seatback lumbar bun fastener.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    1x screw, T20, 1.5 Nm
  9. Remove push clip from trim.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    1x clip, Remove trim clip from cover

Installer

  1. Install center inner cover.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Install inner cover ensuring the clips seat to outer cover.
  2. Install push clip to trim.
  3. Install center seatback lumbar bun.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Press seatback lumbar bun into center frame.
  4. Fold 2nd row 60 seatback down.
  5. Install center seatback lumbar bun fastener.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    1x screw, T20, 1.5 Nm.
  6. Insert backpanel hooks (X2) into center seat back assembly.
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Engage hooks and slide rearward into position, early production have 4x hooks.
  7. Install 2nd row center headrest.
  8. Return 2nd row 60 seatback to vertical position.
  9. Move RH front seat to original position.
  10. Move LH front seat to original position.
  11. Raise all four windows.
  12. Close all four doors
    Informational PurposesAn informational icon, calling your attention
    Remarque
    If LV is powered up then unlatch rear doors before closing.