2026-04-30

3rd row substrate - LH (7-Seat) (Remove and Replace)

Code de correction 1309010601 1309010602 REMARQUE : À moins d’indications explicites contraires dans la procédure, le code de correction et le temps forfaitaire indiqués ci-dessus représentent tout le travail à être fait pour cette procédure, notamment les procédures connexes. N’appliquez pas plusieurs codes de correction à la fois, à moins qu’il vous soit explicitement indiqué de le faire. REMARQUE : Consultez Temps forfaitaires pour en apprendre plus à propos des temps forfaitaires et de leur création. NOTE : Consultez Protection individuelle pour vous assurer de porter l’équipement de protection individuelle adéquat lorsque vous effectuez la procédure ci-dessous. REMARQUE : Voir Précautions ergonomiques pour consulter les pratiques de travail sécuritaires et saines.

Warning IconA warning icon, calling your attention to a possibly risky situation
Avertissement
Cette procédure est une PREMIÈRE VERSION. Bien qu'elle ait été validée, des avertissements et des mises en garde pourraient manquer. Respectez les exigences de sécurité et faites preuve d’une extrême prudence lorsque vous travaillez sur ou près des systèmes et des composants haute tension.
  • 2026-01-26: Released new procedure.
  1. Open all four doors
  2. Lower all four windows
  3. Open liftgate
  4. Move LH front seat forward
  5. Position 60 seat into easy entry mode
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Press shoulder switch and push 60 seat forward to position into easy entry mode
  6. Move RH front seat forward
  7. Position 40 seat into easy entry mode
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Press shoulder switch and push 40 seat forward to position into easy entry mode
  8. Remove 3rd row seat cushion and disconnect harness
    Informational PurposesAn informational icon, calling your attention
    Remarque
    1x connector, Pull LH and RH release lever under 3rd row seat cushion to release seat cushion
  9. Remove 3rd row LH seat cushion bolster
    Informational PurposesAn informational icon, calling your attention
    Remarque
    1x bolt, 13mm, 37 Nm, Slide LH seat cushion bolster towards front of vehicle to remove
  10. Remove bolt securing 3rd row LH seat belt retractor to seat frame assembly
    Informational PurposesAn informational icon, calling your attention
    Remarque
    1x bolt, 11mm, 37 Nm, Discard bolt after removal
  11. Remove rear load floor
  12. Remove 3rd row LH back panel from LH seatback assembly
    Informational PurposesAn informational icon, calling your attention
    Remarque
    10x clips, 2x guide hooks, Once cover clips are disengaged, slide back panel up and away from 3rd row seat for full removal
  13. Remove 3rd row LH headrest
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Depress guide button, Insert pick into guide opening, Lift headrest upwards and remove
  14. Remove 3rd row LH adjustment guide from LH headrest closeout panel
    Informational PurposesAn informational icon, calling your attention
    Remarque
    1x tab, Release detent tab at rear of seat, then pry adjustment guide upwards to release from seat
  15. Remove 3rd row RH adjustment guide from RH headrest closeout panel
    Informational PurposesAn informational icon, calling your attention
    Remarque
    1x tab, Release detent tab at rear of seat, then pry adjustment guide upwards to release from seat
  16. Remove 3rd row LH headrest closeout panel from LH backrest
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Lift upward to remove LH headrest closeout panel
  17. Remove 3rd row LH shoulder switch from LH backrest
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x clips, 1x connector
  18. Remove 3rd row LH escutcheon from LH backrest
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x clips
  19. Remove fasteners securing 3rd row LH backrest to LH seatback assembly
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x fasteners, T25, 2.5 Nm
  20. Release clips securing 3rd row LH backrest to LH seatback assembly
    Informational PurposesAn informational icon, calling your attention
    Remarque
    4x clips, Push clips in to remove from frame
  21. Remove 3rd row LH backrest from LH seatback assembly
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x tabs
  22. Remove 3rd row LH trim cover from LH back substrate
    Informational PurposesAn informational icon, calling your attention
    Remarque
    26x tabs, Release RH tabs then LH tabs
  23. Install 3rd row LH trim cover to LH back substrate
    Informational PurposesAn informational icon, calling your attention
    Remarque
    26x tabs, Install LH tabs then RH tabs
  24. Install 3rd row LH backrest to LH seatback assembly
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x tabs, 4x clips
  25. Install fasteners securing 3rd row LH backrest to LH seatback assembly
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x fasteners, T25, 2.5 Nm
  26. Install 3rd row LH escutcheon into LH backrest
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x clips
  27. Install 3rd row LH shoulder switch into LH backrest
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x clips, 1x connector
  28. Install 3rd row LH closeout panel into LH backrest
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x tabs
  29. Install 3rd row RH adjustment guide into LH closeout panel
  30. Install 3rd row LH adjustment guide into LH closeout panel
  31. Install 3rd row LH headrest
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Depress adjustment guides during installation
  32. Install 3rd row LH back panel to LH seatback assembly
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x tabs, 10x clips
  33. Install rear load floor
  34. Install bolt securing 3rd row LH seat belt retractor to seat frame assembly
    Informational PurposesAn informational icon, calling your attention
    Remarque
    1x bolt, 11mm, 37 Nm, Bolt is one time use
  35. Install 3rd row LH seat cushion bolster
    Informational PurposesAn informational icon, calling your attention
    Remarque
    1x bolt, 13mm, 37 Nm, Slide LH seat cushion bolster into seat frame assembly
  36. Install 3rd row seat cushion and connect harness
    Informational PurposesAn informational icon, calling your attention
    Remarque
    1x connector, Secure 3rd row seat cushion into RH and LH latches
  37. Move 60 seat to original position
  38. Move LH front seat to original position
  39. Move 40 seat to original position
  40. Move RH front seat to original position
  41. Raise all four windows
  42. Close all four doors
    Informational PurposesAn informational icon, calling your attention
    Remarque
    If LV is powered up, Unlatch rear doors before closing
  43. Close liftgate