Torque Specifications - Brakes

Table 1. Technische Daten zum Drehmoment: ABS-Bremskraftregler (Ausbauen und Ersetzen)
Beschreibung Drehmomentwert Empfohlene Werkzeuge Wiederverwenden/Ersetzen Hinweise
Nuts that attach the ABS modulator to the bracket
8 Nm (5.9 lbs-ft)
  • Steckschlüssel, 10 mm, tief
Wiederverwenden
Bolts that attach the ABS modulator to the LH frame rail
10 Nm (7.4 lbs-ft)
  • Steckschlüssel, 10 mm
Wiederverwenden
Bolt that attaches the steering gear assembly to the intermediate shaft assembly
18 Nm (13.3 lbs-ft)
  • 13 mm socket
Wiederverwenden
Master cylinder primary pipe nut to the ABS modulator
16 Nm (11.8 lbs-ft)
  • 12 mm flare nut wrench
  • 12 mm flare nut crowfoot socket
Wiederverwenden
Master cylinder secondary pipe nut to the ABS modulator
16 Nm (11.8 lbs-ft)
  • 12 mm flare nut wrench
  • 12 mm flare nut crowfoot socket
Wiederverwenden
LH front brake pipe nut to the ABS modulator
16 Nm (11.8 lbs-ft)
  • 12 mm flare nut wrench
  • 12 mm flare nut crowfoot socket
Wiederverwenden
RH rear brake pipe nut to the ABS modulator
16 Nm (11.8 lbs-ft)
  • 12 mm flare nut wrench
  • 12 mm flare nut crowfoot socket
Wiederverwenden
LH rear brake pipe nut to the ABS modulator
16 Nm (11.8 lbs-ft)
  • 12 mm flare nut wrench
  • 12 mm flare nut crowfoot socket
Wiederverwenden
RH front brake pipe nut to the ABS modulator
16 Nm (11.8 lbs-ft)
  • 12 mm flare nut wrench
  • 12 mm flare nut crowfoot socket
Wiederverwenden
Bolts that attach the LH and RH sides of the shock tower brace See image in procedure for proper torque specifications
  • Steckschlüssel, 15 mm, tief
Wiederverwenden
Outer bolt that attaches the shock tower brace to the vehicle
62 Nm (45.7 lbs-ft)
  • Steckschlüssel, 15 mm, tief
Wiederverwenden
Inner bolts that attach the shock tower brace to the vehicle
55 Nm (40.6 lbs-ft)
  • Steckschlüssel, 15 mm, tief
Wiederverwenden
Table 2. Technische Daten zum Drehmoment: Steuergerät – ABS (Nicht Strukturpack)(Ausbauen und Ersetzen)
Beschreibung Drehmomentwert Empfohlene Werkzeuge Wiederverwenden/Ersetzen Hinweise
Bolt securing the steering gear assembly to the intermediate shaft assembly
18 Nm (13.3 lbs-ft)
  • 13 mm socket
  • Ratschen-/Drehmomentschlüssel
Wiederverwenden
Fasteners securing the hydraulic control unit to the hydraulic control unit bracket
8 Nm (5.9 lbs-ft)
  • 10 mm deep socket
  • 10 in extension
  • Ratschen-/Drehmomentschlüssel
Ersetzen
Bolts securing the hydraulic control unit to the frame rail
10 Nm (7.4 lbs-ft)
  • 10 mm socket
  • 6 in extension locking
  • Ratschen-/Drehmomentschlüssel
Wiederverwenden
Upper bolts securing the hydraulic control unit ECU to the hydraulic control unit
3 Nm (2.2 lbs-ft)
  • External Torx E5
  • 2 in extension
  • Flex head ratchet/flex head torque wrench
Ersetzen
Lower bolts securing the hydraulic control unit ECU to the hydraulic control unit
3 Nm (2.2 lbs-ft)
  • External Torx E5
  • 2 in extension
  • Flex head ratchet/flex head torque wrench
Ersetzen
Table 3. Technische Daten zum Drehmoment: Elektromechanische Bremskraftverstärker-Baugruppe (Kein Strukturpack) (LHD) (Ausbauen und Ersetzen)
Beschreibung Drehmomentwert Empfohlene Werkzeuge Wiederverwenden/Ersetzen Hinweise
Forward brake line fastener
16 Nm (11.8 lbs-ft)
  • 12 mm 12pt combination wrench
  • 12 mm flare nut crowfoot socket
Wiederverwenden
Rear brake line fastener
16 Nm (11.8 lbs-ft)
  • 12 mm 12pt combination wrench
  • 12 mm flare nut crowfoot socket
Wiederverwenden
Nuts that attach the brake booster to the bulkhead
16.5 Nm (12.2 lbs-ft)
  • Steckschlüssel, 13 mm, tief
  • 6-Zoll-Verlängerung
Ersetzen 1111541-00-A
Table 4. Torque Specifications: Halterung – Bremssattel – Hinten – LH (Ausbauen und Ersetzen)
Beschreibung Drehmomentwert Empfohlene Werkzeuge Wiederverwenden/Ersetzen Hinweise
Bolts (x2) that attach the LH rear brake caliper to the LH rear brake caliper bracket
26.5 Nm (19.5 lbs-ft)
  • Steckschlüssel, 14 mm
Wiederverwenden
Bolts (x2) that attach the LH rear brake caliper bracket to the LH rear knuckle
83 Nm (61.2 lbs-ft)
  • Außen-Torx E18
Ersetzen
Table 5. Torque Specifications: Bremssattel - Vorne - LH (Ausbauen und Ersetzen)
Beschreibung Drehmomentwert Empfohlene Werkzeuge Wiederverwenden/Ersetzen Hinweise
Bolts that attach the LH front brake caliper to the LH front knuckle
94 Nm (69.3 lbs-ft)
  • Außen-Torx E18
Ersetzen 1088969-00-B
Table 6. Torque Specifications: Brake Caliper - Rear
Beschreibung Drehmomentwert Wiederverwenden/Ersetzen Hinweise
LH rear brake caliper bracket to the knuckle
83 Nm (61.2 lbs-ft)
Ersetzen
Brake hose to the LH rear brake caliper
42 Nm (31.0 lbs-ft)
Ersetzen
LH rear brake caliper electrical harness clips
5 Nm (3.7 lbs-ft)
Wiederverwenden
Table 7. Technische Daten zum Drehmoment: Bremsbelag-Kit – Vorne (Ausbauen und Ersetzen)
Beschreibung Drehmomentwert Empfohlene Werkzeuge Wiederverwenden/Ersetzen Hinweise
Bolts that attach the LH front brake caliper to the LH front knuckle
94 Nm (69.3 lbs-ft)
  • Außen-Torx E18
Ersetzen
Bolt that attaches the LH front brake hose bracket to the LH front knuckle
5 Nm (3.7 lbs-ft)
  • Steckschlüssel, 10 mm
Wiederverwenden
Table 8. Technische Daten zum Drehmoment: Bremsbelag-Kit – Hinten (Basisbremsen) (Ausbauen und Ersetzen)
Beschreibung Drehmomentwert Wiederverwenden/Ersetzen Hinweise
LH rear brake caliper to the LH rear brake caliper bracket
26.5 Nm (19.5 lbs-ft)
  • Steckschlüssel, 14 mm
Wiederverwenden
Bolt that attaches the LH rear EPB harness bracket to the LH rear caliper
5 Nm (3.7 lbs-ft)
  • Steckschlüssel, 10 mm
Wiederverwenden
Table 9. Technische Daten zum Drehmoment: Bremsbelag-Kit – Hinten (Sportbremsen) (Ausbauen und Ersetzen)
Beschreibung Drehmomentwert Wiederverwenden/Ersetzen Hinweise
LH/RH rear caliper to the LH/RH rear caliper bracket, lower bolt
71 Nm (52.4 lbs-ft)
Wiederverwenden
LH/RH rear caliper to the LH/RH rear caliper bracket, upper bolt
34 Nm (25.1 lbs-ft)
Wiederverwenden
Table 10. Technische Daten zum Drehmoment: Bremsscheibe - Vorn - LH (Ausbauen und Ersetzen)
Beschreibung Drehmomentwert Empfohlene Werkzeuge Wiederverwenden/Ersetzen Hinweise
LH front brake hose bracket to the LH front knuckle
5 Nm (3.7 lbs-ft)
  • Steckschlüssel, 10 mm
Wiederverwenden
LH front caliper to the LH front knuckle
94 Nm (69.3 lbs-ft)
  • Außen-Torx E18
Ersetzen 1088969-00-B
Brake rotor to the hub
5 Nm (3.7 lbs-ft)
  • Steckschlüssel, 10 mm
Wiederverwenden
Table 11. Technische Daten zum Drehmoment: Bremsscheibe – Hinten – LH (Schlag messen)
Beschreibung Drehmomentwert Empfohlene Werkzeuge Wiederverwenden/Ersetzen Hinweise
Bolts that attach the brake rotor camping plate to the rotor
100 Nm (73.7 lbs-ft)
  • Steckschlüssel, 21 mm, tief
Wiederverwenden
Bolt that attaches the front rotor to the knuckle
5 Nm (3.7 lbs-ft)
  • Steckschlüssel, 10 mm
Wiederverwenden
Table 12. Torque Specifications: Brake Rotors - Rear - LH
Beschreibung Drehmomentwert Empfohlene Werkzeuge Wiederverwenden/Ersetzen Hinweise
LH rear caliper to the LH rear knuckle
83 Nm (61.2 lbs-ft)
  • Außen-Torx E18
Ersetzen
Brake rotor to the hub
5 Nm (3.7 lbs-ft)
  • Steckschlüssel, 10 mm
Wiederverwenden
Table 13. Torque Specifications: Motor – Bremssattel – Hinten – LH (Ausbauen und Ersetzen)
Beschreibung Drehmomentwert Empfohlene Werkzeuge Wiederverwenden/Ersetzen Hinweise
Bolts (x2) that attach the LH rear brake caliper motor to the brake caliper
10.8 Nm (8.0 lbs-ft)
  • 5-mm-Innensechskant
Ersetzen 8008277-00-A
Table 14. Torque Specifications: Bremsscheibenabdeckung – Vorne – LH (RWD) (Ausbauen und Ersetzen)
Beschreibung Drehmomentwert Empfohlene Werkzeuge Wiederverwenden/Ersetzen Hinweise
LH front brake dust shield to the knuckle
8 Nm (5.9 lbs-ft)
  • T30 socket
Wiederverwenden
Table 15. Torque Specifications: Shield - Dust - Brake - Rear - LH (Remove and Replace)
Beschreibung Drehmomentwert Empfohlene Werkzeuge Wiederverwenden/Ersetzen Hinweise
LH rear brake dust shield to the knuckle
8 Nm (5.9 lbs-ft)
  • Torx-Steckschlüssel T30
Wiederverwenden
Hub to the knuckle
78 Nm (57.5 lbs-ft)
  • 18 mm socket
Wiederverwenden
LH rear drive unit halfshaft nut
300 Nm (221.2 lbs-ft)
  • Kraft-Steckschlüsseleinsatz, 32 mm, tief
  • Brecheisen
Ersetzen
Bolts that attach the rear brake caliper to the knuckle
83 Nm (61.2 lbs-ft)
  • Außen-Torx E18
Ersetzen
Table 16. Torque Specifications: Sensor – Raddrehzahl – ABS – Vorn – LH (Ausbauen und Ersetzen)/ Sensor – Raddrehzahl – ABS – Hinten – LH (Ausbauen und Ersetzen)
Beschreibung Drehmomentwert Empfohlene Werkzeuge Wiederverwenden/Ersetzen Hinweise
Bolt that attaches the ABS wheel speed sensor to the knuckle
5 Nm (3.7 lbs-ft)
  • Steckschlüssel, 10 mm, tief
Wiederverwenden