19/01/2025 21:24:19

2nd Row Seat Covers and Pads - 2nd Row Buckle Closeout - LH (Remove and Replace)

Code de correction NA REMARQUE : À moins d’indications explicites contraires dans la procédure, le code de correction et le temps forfaitaire ci-dessus représentent tout le travail à être fait pour cette procédure, notamment les procédures connexes. N’appliquez pas plusieurs codes de correction à la fois, à moins qu’il vous soit explicitement indiqué de le faire. REMARQUE : Consultez Temps forfaitaires pour en apprendre plus à propos des temps forfaitaires et de leur création. Vous pouvez transmettre par courriel vos commentaires relatifs aux valeurs des temps forfaitaires à LaborTimeFeedback@tesla.com. REMARQUE : Consultez Protection individuelle pour vous assurer de porter l’équipement de protection individuelle adéquat lors vous effectuez la procédure ci-dessous.

Warning IconA warning icon, calling your attention to a possibly risky situation
Avertissement
Cette procédure est une PREMIÈRE VERSION. Bien qu'elle ait été validée, des avertissements et des mises en garde pourraient manquer. Respectez les exigences de sécurité et faites preuve d’une extrême prudence lorsque vous travaillez sur ou près des systèmes et des composants haute tension. Transmettez toute correction ou remarque à ServiceDevelopment@teslamotors.com.
  1. Open LH rear door
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Push LH C-pillar door trigger to release
  2. Lower LH rear window
  3. Partially release LH rear primary door seal
  4. Remove LH lower C-pillar trim
    Informational PurposesAn informational icon, calling your attention
    Remarque
    3x clips, 7x tabs, 4x datums, Starting at door sill pull upward then forward to release, Leave trim attached to seat belt
  5. Remove 2nd row seatback LH outboard bolster
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x tabs, 1x datum, 3x clips, Release tab near the bottom of LH outboard bolster, Partially release LH 2nd row shoulder cover and remove bolster from vehicle
  6. Fold up 2nd row 60 seat
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Pull tether to release then lift up until locked in place
  7. Open RH rear door
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Push RH C-pillar door trigger to release
  8. Lower RH rear window
  9. Fold up 2nd row 40 seat
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Pull tether to release then lift up until locked in place
  10. Partially release RH lower C-pillar trim
    Informational PurposesAn informational icon, calling your attention
    Remarque
    1x clip, 1x datum
  11. Remove rear wall lower trim
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x push clips, 4x clips, Remove outermost push clips, then pull straight forward to release inner clips
  12. Fold down 2nd row 40 seat
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Pull tether to release then pivot down until locked in place
  13. Disconnect LH 2nd row cushion assembly connectors
    Informational PurposesAn informational icon, calling your attention
    Remarque
    3x connectors, 5x clips
  14. Remove LH 2nd row seat cushion outboard cover
    Informational PurposesAn informational icon, calling your attention
    Remarque
    1x clip, Pull outward from lower forward section to release
  15. Release LH 2nd row cushion from underbelly
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Pull plastic retainers outward to release from underbelly
  16. Remove LH 2nd row seat underbelly
    Informational PurposesAn informational icon, calling your attention
    Remarque
    8x clips, Pull outwards from bottom to release
  17. Remove LH 2nd row cushion assembly
    Informational PurposesAn informational icon, calling your attention
    Remarque
    6x clips, Lift upwards off seat frame
  18. Remove LH 2nd row seat buckle closeout assembly
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x clips, 4x datums
  19. Install LH 2nd row seat buckle closeout assembly
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x clips, 4x datums
  20. Install LH 2nd row cushion assembly
    Informational PurposesAn informational icon, calling your attention
    Remarque
    6x clips, Lower onto seat frame
  21. Install LH 2nd row seat underbelly
    Informational PurposesAn informational icon, calling your attention
    Remarque
    8x clips, Push inwards to engage clips
  22. Secure LH 2nd row cushion to underbelly
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Secure plastic retainers in channel
  23. Install LH 2nd row seat cushion outboard cover
    Informational PurposesAn informational icon, calling your attention
    Remarque
    1x clip, Pull outward from lower forward section to release
  24. Fold up 2nd row 40 seat
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Pull tether to release then lift up until locked in place
  25. Connect LH 2nd row cushion assembly connectors
    Informational PurposesAn informational icon, calling your attention
    Remarque
    3x connectors, 5x clips
  26. Install rear wall lower trim
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x push clips, 4x clips
  27. Fold down 2nd row 40 seat
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Pull tether to release then pivot down until locked in place
  28. Fold down 2nd row 60 seat
    Informational PurposesAn informational icon, calling your attention
    Remarque
    Pull tether to release then pivot down until locked in place
  29. Install LH lower C-pillar tr
    Informational PurposesAn informational icon, calling your attention
    Remarque
    3x clips, 7x tabs, 4x datums
  30. Secure LH rear primary door seal
  31. Install 2nd row seatback LH outboard bolster
    Informational PurposesAn informational icon, calling your attention
    Remarque
    2x tabs, 1x datum, 3x clips, Position LH outboard bolster into place, Ensure all clips and tabs are fully engaged, Replace any missing or damaged clips, Secure LH 2nd row shoulder cover, Perform push-pull-push test
  32. Raise LH rear window
  33. Close LH rear door
  34. Install RH lower C-pillar trim
    Informational PurposesAn informational icon, calling your attention
    Remarque
    1x clip, 1x datum
  35. Raise RH rear window
  36. Close RH rear door