2023-01-04
Panneau - écran aérodynamique - avant (retirez et remplacez)
Code de correction
12030102 0.24
REMARQUE : À moins d’indications explicites contraires dans la procédure, le code de correction et le temps forfaitaire ci-dessus représentent tout le travail à être fait pour cette procédure, notamment les procédures connexes. N’appliquez pas plusieurs codes de correction à la fois, à moins qu’il vous soit explicitement indiqué de le faire.
REMARQUE : Consultez Temps forfaitaires pour en apprendre plus à propos des temps forfaitaires et de leur création.
NOTE : Consultez Protection individuelle pour veiller à porter l’ÉPI approprié lorsque vous effectuez la procédureci-dessous.
Avertissement
Cette procédure est une PREMIÈRE VERSION. Bien qu'elle ait été validée, des avertissements et des mises en garde pourraient manquer. Respectez les exigences de sécurité et faites preuve d’une extrême prudence lorsque vous travaillez sur ou près des systèmes et des composants haute tension.
Retirer
- Raise and support the vehicle on a 2 post lift. See Soulever le véhicule - pont élévateur à 2 poteaux.
-
Release the push clips (x2) that
attach the front aero shield panel to the LH and RH front wheel arch liners.
-
Release the push clips (x3) that attach the front aero shield panel to the
underbody.
-
Remove the bolts (x9) that attach the
front aero shield panel to the front subframe, and then remove the panel from the
vehicle.
Installer
-
Apply a drop of Loctite 222 onto the
threads of each front aero shield panel bolt.
-
Install the front aero shield panel to the front subframe, and then install the bolts
(x9) that attach the panel to the subframe.
6 Nm (4.4 lbs-ft) -
Fasten the push clips (x3) that attach the front aero shield panel to the
underbody.
-
Fasten the push clips (x2) that attach the front aero shield panel to the LH and RH
front wheel arch liners.
- Remove the vehicle from the lift. See Soulever le véhicule - pont élévateur à 2 poteaux.