2024-04-29
Dossier de siège - siège de première rangée - gauche (siège sport) (retrait et remplacement)
Code de correction
13041112 0.30
REMARQUE : À moins d’indications explicites contraires dans la procédure, le code de correction et le temps forfaitaire ci-dessus représentent tout le travail à être fait pour cette procédure, notamment les procédures connexes. N’appliquez pas plusieurs codes de correction à la fois, à moins qu’il vous soit explicitement indiqué de le faire.
REMARQUE : Consultez Temps forfaitaires pour en apprendre plus à propos des temps forfaitaires et de leur création.
NOTE : Consultez Protection individuelle pour veiller à porter l’ÉPI approprié lorsque vous effectuez la procédure ci-dessous.
Caractéristiques techniques de couple
| Description | Valeur de couple | Outils recommandés | Réutiliser/remplacer | Remarques |
|---|---|---|---|---|
| Boulon qui fixe le dossier du siège avant gauche à l’ensemble de siège |
![]() 5 Nm (3.7 lbs-ft) |
|
Réutiliser |
Retirer
- Remove the driver seat headrest. See Appuie-tête - gauche (siège sport) (retrait et remplacement).
- Remove the LH front seat décor assembly. See Garniture décorative - siège de première rangée - gauche (siège sport) (retrait et remplacement).
- Remove the LH front seat back panel. See Back Panel - LH (Sport Seat) (Remove and Replace).
- Remove the rear underhood apron. See Tablier sous le capot - arrière (retirez et remplacez).
- Disconnect LV power. See Alimentation 12 BT (déconnecter et connecter).
-
Disconnect the LH front seat harness
connectors (x2) from the seat back assembly.
-
Release the clip that attaches the LH
front seat harness to the seat back.
-
Disconnect the LH front lumbar valve
pack electrical connector.
-
Remove the bolt that attaches the LH
front seat back to the seat assembly.
TIpNous recommandons l’utilisation des outils suivants :
- Rallonge de 2 po
- Douille de 10 mm
- Clé à cliquet sans fil/Visseuse à percussion
- Clé à cliquet/Clé dynamométrique
-
Move the LH front seat seat back away
from the seat frame to allow access to the 2nd row.
-
Disconnect the LH front lumbar motor
electrical connector.
-
Release the clips (x2) that attach the
LH front lumbar motor assembly to the seat assembly.
-
Remove the LH front seat back assembly
from the seat frame.
Installer
-
Install the LH front seat back
assembly onto the seat frame.
-
Position the LH front lumbar motor poutch onto the seat frame, and then secure the
clips (x2) that attach the assembly to the seat.
-
Connect the LH front lumbar motor electrical connector.
-
Position the LH front seat back
assembly onto the seat frame.
-
Install the bolt that attaches the LH
front seat back to the seat assembly.
5 Nm (3.7 lbs-ft)TIpNous recommandons l’utilisation des outils suivants :- Rallonge de 2 po
- Douille de 10 mm
- Clé à cliquet sans fil/Visseuse à percussion
- Clé à cliquet/Clé dynamométrique
-
Connect the LH front lumbar valve pack electrical connector.
-
Install the clip that attaches the LH front seat harness to the seat back.
-
Connect the LH front seat harness
connectors (x2) to the seat back assembly.
- Connect LV power. See Alimentation 12 BT (déconnecter et connecter).
- Install the rear underhood apron. See Tablier sous le capot - arrière (retirez et remplacez).
- Install the LH front seat back panel. See Back Panel - LH (Sport Seat) (Remove and Replace).
- Install the LH front seat décor assembly. See Garniture décorative - siège de première rangée - gauche (siège sport) (retrait et remplacement).
- Install the driver seat headrest. See Appuie-tête - gauche (siège sport) (retrait et remplacement).
- Raise the LH front window and close the LH doors.