2017–2023 Model 3 Service Manual

34 – Räder und Reifen

Model 3 Werkstatthandbuch
Versionshinweise
Allgemeine Informationen
00 – Inspektion und Service
10 – Karosserie
11 – Klappen und Türen
12 – Außenausstattung
13 – Sitze
14 – Instrumententafel
- Drehmomentdaten – Instrumententafel
- 1405 – Instrumententafel
15 – Innenverkleidung
16 – Batteriesystem
17 – Elektrik
18 – Wärmemanagement
20 – Sicherheits- und Rückhaltesysteme
21 – Infotainment
30 – Chassis
- Drehmomentdaten – Chassis
- 3001 – Chassis und Hilfsrahmen
31 – Aufhängung
32 – Lenkung
33 – Bremsen
34 – Räder und Reifen
39 – Vordere Antriebseinheit
40 – Hintere Antriebseinheit
44 – Hochspannungssystem
50 – Externe Aufladesteckdosen
- 5001 – Mobile Connector
- 5003 – Ladeadapter
  - Firmware-Update – CHAdeMO-Ladeadapter

On this page

You will be redirected to your default email client to provide feedback.

Torque Calculator Values

T1 (Original torque spec)

L (Distance from center of wrench grip to center of square drive tang)

E (Horizontal distance from center of square drive tang to center of fastener)

Anmerkung

If the angle from the extension to the torque wrench is greater than 90° (Figure 2), input E as a positive number.
If the angle from the extension to the torque wrench is less than 90° (Figure 3), input E as a negative number.
If the angle from the extension to the torque wrench is exactly 90°, this calculator is not needed. Torque the fastener to T1.

T2 (Final torque setting)>