Código de corrección 13010102601 0.66 NOTA: Salvo que se indique lo contrario explícitamente en el procedimiento, el código de corrección y el FRT mencionados anteriormente reflejan todo el trabajo necesario para realizar este procedimiento, incluidos los procedimientos vinculados. No acumule códigos de corrección a menos que se le indique explícitamente que lo haga. NOTA: Consulte Tiempos de tarifa plana para obtener más información sobre los FRT y cómo se crean. NOTA: Consulte Protección personal para asegurarse de llevar el EPI adecuado al realizar el siguiente procedimiento. NOTA: Consulte Precauciones ergonómicas para ver información sobre prácticas de trabajo seguras.

1. Remove the LH front seat assembly from the vehicle. See Seat Assembly - 1st Row - LH (Remove and Install).
2. Place LH front seat on a protected surface
   Nota

   Recommend assistance, Place seat so the underside of the seat can be accessed

   

3. Disconnect LH front seat track motor
   Nota

   1x connector

   

4. Release LH front seat harness from track bridge
   Nota

   3x Clips

   

5. Remove outboard bolts securing seat track to seat cushion frame
   Nota

   2x patch bolts, T45P, 23 Nm, Discard after removal

   

6. Release outboard track from bridge motor
   Nota

   1x tab, Pry up on bridge tack motor tab and slide outboard seat track away to release

   

   

   

7. Release track motor bridge from inboard track
   Nota

   1x tab, Pry up on track motor bridge tab and slide away from inboard track

   

   

   

8. Install track motor bridge to inboard seat track
   Nota

   1x tab, Track motor cable is keyed square and must be aligned with inboard track, Turn cable by hand to align as needed, Slide track motor bridge into inboard track till fully seated to secure

   

   

   

   

9. Install outboard seat track to track motor bridge
   Nota

   1x tab, Track motor cable is keyed square and must be aligned with outboard track, Turn cable by hand to align as needed, Slide outboard track into track motor bridge till fully seated to secure

   

   

   

10. Install outboard bolts securing seat track to seat cushion frame
    Nota

    2x patch bolts, T45P, 23 Nm, Install new patch bolts

    

11. Secure LH front seat harness to track bridge
    Nota

    3x Clips

    

12. Connect LH front seat track motor
    Nota

    1x connector

    

13. Install the LH front seat assembly into the vehicle. See Seat Assembly - 1st Row - LH (Remove and Install).