2024-11-08

Windshield Washer Bottle and Pump - Mega Beam - Washer Hose Assembly (Remove and Install)

Código de corrección NEW NOTA: Salvo que se indique lo contrario explícitamente en el procedimiento, el código de corrección anterior y el FRT reflejan todo el trabajo necesario para realizar este procedimiento, incluidos los procedimientos vinculados. No acumule códigos de corrección a menos que se le indique explícitamente que lo haga. NOTA: Consulte Tiempos de tarifa plana para obtener más información sobre los FRT y cómo se crean. Para enviar sus comentarios sobre los valores de FRT, escriba a LaborTimeFeedback@tesla.com. NOTA: Consulte Protección personal para asegurarse de llevar el EPI adecuado al realizar el siguiente procedimiento.

Warning IconA warning icon, calling your attention to a possibly risky situation
Aviso
Este procedimiento están en fase PRELIMINAR. Aunque se ha validado, es posible que falten advertencias y precauciones. Siga los requisitos de seguridad y tenga mucho cuidado cuando trabaje en sistemas y componentes de alta tensión o cerca de ellos. Envíe sus correcciones y comentarios a ServiceDevelopment@teslamotors.com.

Retirar

  1. Remove the frunk assembly. See Frunk Assembly (Remove and Install).
  2. Release the clip that attaches the windshield wiper washer hose to the megabeam washer hose, and then disconnect the hoses.
  3. Release the clip that attaches the windshield wiper washer hose to the wiper motor assembly hose, and then disconnect the hoses.
  4. Release the clips (x6) that attach the megabeam windshield washer hose to the vehicle, and then remove the hose from the vehicle.

Instalar

  1. Position the megabeam windshield washer hose into the vehicle, and then secure the clips that attach the hose to the vehicle.
  2. Connect the megabeam windshield washer hose to the wiper motor assembly hose, and then secure the clip.
  3. Connect the megabeam windshield washer hose to the washer hose assembly, and then secure the clip.
  4. Install the frunk assembly. See reFrunk Assembly (Remove and Install).